I'm new to 3D printing, so grains of salt abound, but since I started in on the hobby this Christmas, I've purchased four 3D printers. 3 budget-but-highly-regarded kings to start, but they all gave me tons of trouble. The Elegoo Centauri Carbon I got for Christmas that sparked this mess is a budget knockoff of the Bambu X1C, but in the first 30 days of ownership, I experienced 2 hardware failures that (thanks to having to ship parts from Mainland China) have resulted in 16 days of downtime.
To deal with the downtime, I bought a stopgap Qidi Q2, but it had tons of problems -- problems which, according to the reviewers, have all been solved for. Ambiguous error messages. Poor English. Choices between "OK" and "Confirm", neither of which advanced the system. Mainboard errors. Extruder failures. Boot failures. Firmware upgrade failures. I experienced all of these within the first 3 hours of ownership, and filed for a return.
I was working on a project that needed a printer, and now despite having bought a bunch of printers, I didn't have any printers that could print. Looking around locally at what I could buy that day amounted to either a Bambu P2S or a Sovol SV08. I struggled here, because I would _much_ rather be the Sovol owner than the Bambu owner, but I needed a printer, not a project, and so I decided I'd try out the Bambu until I got done with what I needed it for, and then I'd return it.
But it turns out it was amazing. The others (admittedly, budget units) were loud and cantankerous, but the Bambu was only uncivilized for a few minutes of each print, and the rest of the time you barely noticed it running. The ecosystem is obviously great. Being able to monitor jobs or initiate prints from my phone is admittedly a novelty, but it's a nice one, and one that speaks to a consistency of integration. But the important part is that it just worked. There were printable upgrades available, I didn't need to print modular pieces to fix design flaws like the other units. I didn't need to move it further away to deal with the noise. I didn't need to investigate arcane error messages because none ever arose.
Now, I haven't owned a Prusa, so I'm not trying to compare them. I understand that Prusa hardware quality is amazing. I believe that. I'm also wildly interested in the community efforts to implement tool-changing with INDX and INBXX, and they're the kinds of projects that I want to tinker with. But if I'm to own a Prusa, or a Sovol, or a Voron, it'll have to be as my second printer (well technically third, because I still own the Elegoo because it's too cheap to bother trying to return) because most of the time I want to print things, not tinkering with the printer. But while the Prusa machines might be amazing, the Prusa XL is wildly expensive for 5 colors, and the Core One right now can't be bought with multi-color capabilities.
I'm not trying to argue against Prusa here, but the idea that only shills are into Bambu seems flatly wrong. I am ideologically opposed to how Bambu got to the market position they've reached, and for sure they've undoubtedly got a fair amount of shills in their employ but sadly, their products more than live up to the hype.
You are a "new" type of user for the 3d printing world.
In the last decade, most 3d printer users were hobbyists and liked to know the internals of the machine they were using.
That's why there are so many useless models of random gadgets on thingiverse. People didn't care about the output, more about the process.
With the arrival of bambu and the last Creality, the market has shifted to a plug and print model where more and more buy the printer as a tool to produce and output and they don't care about the internals or gcode.
They must be able to control their printers from their phone.
The people that started in 3d printing when they had to assemble the whole machine by hand are now sad to see their hobby replaced by something too easy, it feels like cheating.
"How come you don't know how to level the bed and measure the offset with a piece of paper? "
Just like senior dev are sad to see vibe coding replace "true development craft".
>>You are a "new" type of user for the 3d printing world.
Why can't you be both. I loved my time with my Ender 5 Pro, I had it for 3 years and I will always freely admit that 90% of the fun was with the tinkering to make the machine work correctly. But you know, you get bored of it. I got an H2D just before christmas and it's incredible to have a machine that "just works". I can print things for myself and others and not worry whether it's going to work or not - it just will.
Same as I used to tinker with my cars when I was younger, now I want an appliance car - I want to get in, press start and drive across europe not worrying whether I'll have to fix it on the roadside or not. I would say it's just getting older, but I Don't think it is - I think everyone goes through stages of developing things they enjoy about their hobbies.
> The people that started in 3d printing when they had to assemble the whole machine by hand are now sad to see their hobby replaced by something too easy, it feels like cheating.
I have a 10 year old kit-built prusa I3 sitting next to me. Its brother is in the basement next to a kossel. It's been years since they have seen action, there is a litany of small bits of work they need.
I unboxed an A1 Mini and it's been like an epiphany. I've been printing almost nonstop. It's so much FUN. I just send from my phone and it just works. Everything has been nearly flawless until last night where half a batch of mini utility knife frames started to spaghetti, probably my fault for not fully cleaning the build plate in a bit.
Beats the hell out of glue stick or blue tape, fussing with slicer params, babysitting the first layers, etc etc. Fuck that, gimme the cheat.
There are plenty of us “old” type of users who made and designed our own printers and parts and spent hours on calibration, who no longer want to unnecessarily waste time doing so.
I might be a software engineering but I’m not going to waste time writing a bootloader for my next PC when it is a solved problem.
Sorry for the old-heads, but just because I'm new doesn't mean I don't appreciate the craft, or the pains endured by many others before me that enabled this painless experience.
But if nobody was fixing the problems everybody was experiencing except Bambu, then frankly, good for Bambu.
Boo to the gate-keepers. Vorons still exist and likely always will for those that want to dork around with printers, but for the rest of us, printers that work empower the field. In the past 5 weeks, I've started to learn and understand how 3D printers work, I've started to do some simple 3D modeling, and I've begun making models with OpenSCAD, which wasn't a thing that I knew existed before. Those parts are currently on Github.
I've organized a billion things. I've modeled a corner for my weird desk's keyboard tray so that it stops cutting my knees when I swivel my chair too quickly. I've delighted my wife by printing some conveniences. I have (admittedly infinitesimally) advanced the availability of 3D models in a way that I simply would not yet have if I were still messing around procuring the Voron parts list. Quality tooling advances the craft as it makes it more accessible.
But the main thing is that it doesn't actually help anybody for 3D printing to be more difficult, nor does wanting Bambu to be bad make them not good. They are good, and they're leaps and bounds better than most of the products in the field.
My first printer was a delta in 2015. I spent more time calibrating it than I did printing, and it was never very good. I then got an Anet A8 in 2017, but it was too flimsy. Cheap, tho!
Around 2021 I spent quite a lot upgrading and dialing in an Ender 3 V2 so it was repeatable, whisper-quiet, and dead reliable.
That's it. This doesn't end with me buying a Bambu. It's still all of those things. I'm very happy with my printing appliance, and also that its only data connection is via microSD sneakernet.
I built my Prusa from a kit and was interested in the internals, but I was always annoyed I spent more time working on the printer sometimes than learning CAD.
And the Prusa is a real workhorse. I’ve only had a couple problems in almost a decade.
A lot of the hobby is people printing out useless things. But the it doesn’t even work for people who are interested in learning CAD. There’s no surprised everyone is turning to Bambu. So will I when my Prusa breaks or there’s a sale too hard to pass up.
I keep backup navigation tablets on my sailboat inside of those, with the idea being that if the boat is ever neutralized by lightning, at least I'll have some backups. (I also have paper charts for most everywhere I might be.)
A lot of people naively interject "But we're not a democracy, we're a Republic!" at arguments where it has no real bearing, but _here_ it does.
We (America) are not a democracy, we're a constitutionally limited republic. Republic is a subset of democracy, but the 'constitutionally limited republic' part is important. We cannot elect politicians to censor the things that we want censored because our republic has not authorized the government to do censorship, and the bill of rights expressly forbids it. They are constitutionally limited from doing so until and unless the constitution is amended.
Until and unless we change the constitution, any efforts to do that are illicit. Popular democracy would allow a majority to vote to bring back slavery, and if you don't like that, you don't like democracy.
As an older engineer, I prefer CLI experiences to avoid mouse usage. The more I use the mouse, the more I notice repetitive stress injury symptoms
But also, 90% of the time if I'm using an IDE like VSCode, I spend most of my time trying to configure it to behave as much like vim as possible, and so a successful IDE needn't be anything other than vim to me, which already exists on the terminal
> there is no one big "subscription that includes everything"
You're right, but the switching cost is super easy, and _most_ of the time, these networks aren't putting out new content that I care that much about, so I've found it easiest to just swap services, keeping one subscription active at a time, and then switching again when I've finished watching everything interesting on the next.
Plex + VPN + Torrents is pretty low cost. The most expensive things are the TVs, the computer+os, and the network maintenance could be a problem for some.
I assume that (like most recipe apps out there) he's just trying to parse the json Recipe schema when it is attached. Most blogs attach them because it helps Google get them indexed.
> that regulation or rule or something that makes it so like a hospital can't open too close to another hospital
You're referring to certificate of need laws, but it's worth pointing out that they're not universal. More than a dozen states have repealed them (or don't have them) and everywhere I've looked, there's strong evidence that their removal has increased healthcare access, which has put downward pressure on cost of service
> Another would be to just, train more doctors!
Bill Clinton placed a cap on GME funding in the 97 Balanced Budget Act, freezing the number of residency slots that the federal government would provide funding for, so this effectively froze the number of residents there could be, which effectively limits the number of doctors possible
That was super helpful. I was assuming from skimming the text description that it was a failed crimp
A lot of people wildly under-crimp things, but marine vessels not only have nuanced wire requirements, but more stringent crimping requirements that the field at large frustratingly refuses to adhere to despite ABYC and other codes insisting on it
The good tools will crimp to the proper pressure and make it obvious when it has happened.
Unfortunately the good tools aren't cheap. Even when they are used, some techs will substitute their own ideas of how a crimp should be made when nobody is watching them.
While the US is still very manual at panel building, Europe is not.
So outside of waiting time, I can go from eplan to "send me precrimped and labeled wires that were cut, crimped, and labeled by machine and automatically tested to spec" because this now exists as a service accessible even to random folks.
This attitude wherein one thinks they can just spend money and offload responsibility is exactly the problem.
Abdicating responsibility to those "good tools" are why shit never gets crimped right. People just crimp away without a care in the world. Don't get me wrong, they're great for speed and when all you're doing it working on brand new stuff that fits perfect. But when you're working on something sketchy you really want the feedback of the older styles of tool that have more direct feedback. They have a place, but you have to know what that place is.
See also: "the low level alarm would go off if it was empty"
I'm new to 3D printing, so grains of salt abound, but since I started in on the hobby this Christmas, I've purchased four 3D printers. 3 budget-but-highly-regarded kings to start, but they all gave me tons of trouble. The Elegoo Centauri Carbon I got for Christmas that sparked this mess is a budget knockoff of the Bambu X1C, but in the first 30 days of ownership, I experienced 2 hardware failures that (thanks to having to ship parts from Mainland China) have resulted in 16 days of downtime.
To deal with the downtime, I bought a stopgap Qidi Q2, but it had tons of problems -- problems which, according to the reviewers, have all been solved for. Ambiguous error messages. Poor English. Choices between "OK" and "Confirm", neither of which advanced the system. Mainboard errors. Extruder failures. Boot failures. Firmware upgrade failures. I experienced all of these within the first 3 hours of ownership, and filed for a return.
I was working on a project that needed a printer, and now despite having bought a bunch of printers, I didn't have any printers that could print. Looking around locally at what I could buy that day amounted to either a Bambu P2S or a Sovol SV08. I struggled here, because I would _much_ rather be the Sovol owner than the Bambu owner, but I needed a printer, not a project, and so I decided I'd try out the Bambu until I got done with what I needed it for, and then I'd return it.
But it turns out it was amazing. The others (admittedly, budget units) were loud and cantankerous, but the Bambu was only uncivilized for a few minutes of each print, and the rest of the time you barely noticed it running. The ecosystem is obviously great. Being able to monitor jobs or initiate prints from my phone is admittedly a novelty, but it's a nice one, and one that speaks to a consistency of integration. But the important part is that it just worked. There were printable upgrades available, I didn't need to print modular pieces to fix design flaws like the other units. I didn't need to move it further away to deal with the noise. I didn't need to investigate arcane error messages because none ever arose.
Now, I haven't owned a Prusa, so I'm not trying to compare them. I understand that Prusa hardware quality is amazing. I believe that. I'm also wildly interested in the community efforts to implement tool-changing with INDX and INBXX, and they're the kinds of projects that I want to tinker with. But if I'm to own a Prusa, or a Sovol, or a Voron, it'll have to be as my second printer (well technically third, because I still own the Elegoo because it's too cheap to bother trying to return) because most of the time I want to print things, not tinkering with the printer. But while the Prusa machines might be amazing, the Prusa XL is wildly expensive for 5 colors, and the Core One right now can't be bought with multi-color capabilities.
I'm not trying to argue against Prusa here, but the idea that only shills are into Bambu seems flatly wrong. I am ideologically opposed to how Bambu got to the market position they've reached, and for sure they've undoubtedly got a fair amount of shills in their employ but sadly, their products more than live up to the hype.